Main features
| Standby power LTP | :63 kW |
| Rated prime power (PRP) | :59 kW |
| Rated continuous power (COP) | :53 kW |
| Phases | :3 |
| Voltage | :400 V |
| Frequency | :50 Hz |
| Engine manufacturer | :Deutz |
| Fuel | :Diesel |
| Speed governor | :Mechanical |
GBW Series
Supusa tuturor normelor de zgomot si emisie, gama de putere medie este realizata pentru a putea indeplini orice tip de aplicatie ce presupune siguranta maxima fara cerinte suplimentare.
GENERATOR * PRAMAC GBW 80
(Generator ilustrativ) - Specificatii Tehnice
- Echipament Standard, optiuni si accesorii
Main specifications |
|
| Type | Canopied |
| Standby power LTP | 78 kVA |
| Standby power LTP | 63 kW |
| Rated prime power (PRP) | 74 kVA |
| Rated prime power (PRP) | 59 kW |
| Rated continuous power (COP) | 66 kVA |
| Rated continuous power (COP) | 53 kW |
| Phases | 3 |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Battery charger current | 80 A |
| Circuit breaker | 125 |
| Ratio | 0,9 |
Engine specifications |
|
| Engine manufacturer | Deutz |
| Model | BF4M2012C |
| Stroke | 4, diesel |
| Fuel | Diesel |
| Number of cylinders and disposition | 4, inline |
| Displacement | 4040 cm³ |
| Air intake | Turbocharged, CAC |
| Starting system | Electric |
| Nominal operating speed | 1500 rpm |
| Speed governor | Mechanical |
| SAE | 3 |
| Flywheel | 11,5 inches |
| Continuous power COP | 59,1 kW |
| Prime power PRP | 66,1 kW |
| Standby power LTP | 70 kW |
| Lube oil capacity | 8,5 l |
| Coolant capacity | 17,9 l |
| Fuel consumption at 100% PRP | 16 l/h |
| Fuel consumption at 75% PRP | 12 l/h |
| Maximum lube oil consumption at PRP | 0,15 % |
| Electric circuit voltage | 12 V |
| Engine derating | 1,0 |
| Cooling fan | Mechanical |
Alternator specifications |
|
| Alternator manufacturer | Stamford |
| Model | UCI 224F |
| Poles | 4 |
| Revolution speed | 1500 rpm |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Continuous nominal power at 40°C - COP | 72,5 kVA |
| Continuous nominal power at 27°C - PRP | 77 kVA |
| Standby power at 27 °C - LTP | 80 kVA |
| Continuous active power at 27°C - PRP | 62 kW |
| Efficiency at 75% load | 89,9 % |
| Efficiency at 100% load | 89,7 % |
| Maximum admitted overload | 10% for 1 hour every 12 hours of running time S2 |
| Voltage regulation system | Electronic |
| Alternator derating | 1,0 |
| Protection grade | IP 23 |
Additional information |
|
| Fuel tank location | Internal |
| Fuel tank capacity | 120 l |
| Running time at 100% PRP | 7,66 h |
| Running time at 75% PRP | 10 h |
| Measured acoustic power (LWA) at 10 mt | 95,85 dBA |
| Noise level at 7 m | 70,9 dBA |
| Guaranteed noise level (LWA) | 96 dBA |
Dimensional data |
|
| Length | 2380 mm |
| Width | 1000 mm |
| Height | 1301 mm |
| Dry weight | 1334 kg |
Equipments |
|
| Mechanical speed governor | Optional |
| Electronic speed governor | Optional |
| Radio interference suppression | Optional |
| Standard AVR (Automatic Voltage Regulator) | Optional |
| Optional AVR (Automatic Voltage Regulator) | Optional |
| Underspeed protection | Optional |
| 12 V electric circuit | Optional |
| 24 V electric circuit | Optional |
| Air intake filter | Optional |
Equipment: panel |
|
| On-board ACP (Automatic Control Panel) | Optional |
| ACP (Automatic Control Panel), delivered loose | Optional |
| On-board LTS (Load Transfer Switch) panel | Optional |
| LTS (Load Transfer Switch) panel, delivered loose | Optional |
| Power section with circuit breaker delivered loose | Optional |
| Power section with on-board circuit breaker | Optional |
| Differential protection | Optional |
| Engine coolant preheater | Optional |
| Manual oil draining pump | Optional |
Equipment: basic engine configuration |
|
| Optimized fuel consumption | Optional |
Equipment: starting system |
|
| Single pneumatic starter motor | Optional |
| Electric starter and compressed air starter | Optional |
| 2 electric starters with separate power supply | Optional |
Equipment: batteries |
|
| Batteries | Optional |
| Battery liquid | Optional |
| Battery disconnecting device | Optional |
Equipment: fuel feeding system |
|
| Air filters with contamination indicator | Optional |
| Fuel level sensor (minimum and maximum) | Optional |
| Fuel main filter | Optional |
| Fuel prefilter water separator | Optional |
| Electric valve for fuel circuit | Optional |
Equipment: lube oil system |
|
| Lube oil filler neck, dipstick | Optional |
| Lube oil fine filter | Optional |
| Lube oil cooler | Optional |
Equipment: exhaust line |
|
| No silencer option | Optional |
| Catalytic silencer | Optional |
| Spark arrester | Optional |
| Flexible exhaust compensator | Optional |
| Connection flanges to exhaust line | Optional |
Equipment: silencer |
|
| Industrial silencer -15 dB(A) | Optional |
| Residencial silencer -35 dB(A) | Optional |
Equipment: engine switches and senders |
|
| Fuel minimum level switch | Optional |
| Coolant minimum level switch | Optional |
| Coolant temperature switch | Optional |
| Coolant temperature sender | Optional |
| Lube oil minimum level switch | Optional |
| Lube oil minimum pressure switch | Optional |
| Lube oil maximum temperature switch | Optional |
| Lube oil temperature sender | Optional |
| Lube oil pressure sender | Optional |
